SH0702 40kPaの真空圧で燃料油総堆積物決定方法
| Key Words: | Fuel Oil Total Sediment Determination Method |
|---|---|
| Waste Flask Capacity: | 500ml |
| Test Sample: | 25g |
プロフェッショナルで正確なディーゼル燃料試験装置 0.5% M/m 試験範囲
| Product Name: | Diesel Fuel Testing Equipment Residual Fuel Oil Total Sediment Analyzer ASTM D4870 |
|---|---|
| Vacuum pressure: | 40kPa |
| Waste Flask Capacity: | 500ml |
500ml廃棄物ボトル容量 1000Wの電力を持つASTM D4870総堆積物分析機
| Filter paper: | aperture 0.0016mm, diameter 47mm |
|---|---|
| Vacuum pressure: | 40kPa |
| Test Sample: | 25g |
総堆積物の測定方法のための先進的なディーゼル燃料試験装置
| Applicable standards: | SH/T0701 SH/T0702 ASTM D4870 |
|---|---|
| Net weight: | 36KG |
| Product Name: | Diesel Fuel Testing Equipment Residual Fuel Oil Total Sediment Analyzer ASTM D4870 |
0. 5% M/m 試験範囲 残留燃料油 500ml 容量の廃棄物ボトルを持つ総堆積物分析機
| Standard: | ASTM D4870 |
|---|---|
| Key Words: | Fuel Oil Total Sediment Determination Method |
| Vacuum pressure: | 40kPa |
25Wの混合モーターを搭載したディーゼル燃料の蒸発損失測定装置
| Temperature Control Accuracy: | ±0.5ºC |
|---|---|
| Mixing Motor: | 25W |
| Product Name: | Diesel Fuel Testing Equipment ASTM D972 Lubricating Oils And Greases Evaporation Loss Tester |
精密な潤滑油/油脂蒸発損失テスト 混合モーター25Wと流量計
| Product Category: | Diesel Fuel Testing Equipment |
|---|---|
| Product Name: | Diesel Fuel Testing Equipment ASTM D972 Lubricating Oils And Greases Evaporation Loss Tester |
| Standard: | ASTM D972 |
室温260 oC 調節可能なディーゼル燃料試験装置 ASTM D972規格
| Suitable for: | Measuring the evaporation loss of lubricating oil or grease at any temperature of 99 ~ 200℃ |
|---|---|
| Standard: | ASTM D972 |
| Product Category: | Diesel Fuel Testing Equipment |
±0.5oC 温度制御精度 潤滑油と油脂蒸発損失テスト
| Product Category: | Diesel Fuel Testing Equipment |
|---|---|
| Standard: | ASTM D972 |
| Temperature Range: | Room Temperature ~ 260 ºC Adjustable |
ASTM D972 ディーゼル燃料試験装置 ±0.5°C 温度制御室温度 260°C 調節可能
| Timing Device: | 0 ~ 100 Hours |
|---|---|
| Temperature Control Accuracy: | ±0.5ºC |
| Product Features: | Composed of bath, temperature control meter, air pump, flow meter, temperature control circuit and so on. An air pump and a flowmeter are used to inject air into the sample in the evaporation test device in the constant temperature bath at a quantitative f |