プラチナ耐性PT100 温度検出用ディーゼル燃料試験装置
| Ambient Temperature: | 10-40℃ |
|---|---|
| Applicable Standards: | GB/T21789, ISO13736 IP170 |
| Range: | -30℃ ~ 80℃ |
ISO13736 IP170 低温循環冷蔵庫の自動アベル閉杯フラッシュポイントテスト
| Product Name: | Diesel Fuel Testing Equipment Automatic Abel closed flash point tester ISO13736 |
|---|---|
| Cooling Method: | Compressor Cycle Refrigeration |
| Abel Flash Point Size: | 490*450*580mm |
低温循環冷蔵庫用ディーゼル燃料試験装置 GB/T21789
| Display Mode: | 6.4" TFT LCD |
|---|---|
| Heating Rate: | 1℃/min |
| Cooling Method: | Compressor Cycle Refrigeration |
490*450*580mm サイズ 航空用燃料フラッシュポイントテスト器 アベル 6.4" TFT LCDディスプレイモード
| Weight: | 40kg |
|---|---|
| Low Temperature Circulating Refrigerator: | ≤1200W |
| Cooling Method: | Compressor Cycle Refrigeration |
環境温度 10-40C ディーゼル燃料試験装置 1C/min 加熱率
| Cooling Method: | Compressor Cycle Refrigeration |
|---|---|
| Key Words: | Abel Closed Cup Flash Point Tester |
| Range: | -30℃ ~ 80℃ |
6.4" TFT LCD ISO13736 Abel Closed Cup フラッシュポイントテスト 温度範囲 -30C 80C
| Temperature Detection: | Platinum Resistance (PT100) |
|---|---|
| Host Power Consumption: | 1800W |
| Ambient Temperature: | 10-40℃ |
ASTM D972 99 200C で測定するための実験用油脂油脂蒸発損失試験装置
| Product Category: | Diesel Fuel Testing Equipment |
|---|---|
| Product Name: | Diesel Fuel Testing Equipment ASTM D972 Lubricating Oils And Greases Evaporation Loss Tester |
| Product Features: | Composed of bath, temperature control meter, air pump, flow meter, temperature control circuit and so on. An air pump and a flowmeter are used to inject air into the sample in the evaporation test device in the constant temperature bath at a quantitative f |
ASTM D972 標準および温度制御のための高度なディーゼル燃料試験機器
| Temperature Control Accuracy: | ±0.5ºC |
|---|---|
| Suitable for: | Measuring the evaporation loss of lubricating oil or grease at any temperature of 99 ~ 200℃ |
| Product Features: | Composed of bath, temperature control meter, air pump, flow meter, temperature control circuit and so on. An air pump and a flowmeter are used to inject air into the sample in the evaporation test device in the constant temperature bath at a quantitative f |
ASTM D972 潤滑油 油脂蒸発損失テスト 精密で正確な測定
| Timing Device: | 0 ~ 100 Hours |
|---|---|
| Temperature Control Accuracy: | ±0.5ºC |
| Standard: | ASTM D972 |
ASTM D972 ディーゼル燃料試験装置 ±0.5°C 温度制御室温度 260°C 調節可能
| Timing Device: | 0 ~ 100 Hours |
|---|---|
| Temperature Control Accuracy: | ±0.5ºC |
| Product Features: | Composed of bath, temperature control meter, air pump, flow meter, temperature control circuit and so on. An air pump and a flowmeter are used to inject air into the sample in the evaporation test device in the constant temperature bath at a quantitative f |